HID XENON hand lamp:

Ideal flexibly usable, portable high power search light. Suitable for emergency services, police, fire brigade, military, hunters or simple to have as much as possible light.

Design based on prolonged extruded profile. Easy to mount different handles and belts. Installable spot light or a broad beam reflector with either clear glas or stray lens.

Electronic concept by nucon GbR
If intrested in design assistance feel free to contact us!

Light source: Osram D1S Xenarc 35W
Weigth: 3,1 kg
Length: 250mm
Battery : 6 Hawker extended D-cells sealed lead acid weight: 1,7 kg
Time of operation: approximately 75 min. in reduced power mode
ballast: nucon 35W/25W XLS3512-1(L)

Control by one push rubber button with micro switch.
Microcontroler does dimming from 35W to 25W, timing functions, self locking, safety functions, etc.
LEDs show status of operation.
Upgrading of firmware is possible.

NEW have a look on a suprising spot light comparisson between 35 W D1S and 22W miniature xenon bulb.

Fast battery charging in about one hour possible.
Charging with a spiral cable connected to the car cigarette lighter, lamp operation with extension cable possible.
Prolonged operation with additional external battery pack.
Standard car lead battery chargers can be used.
Input polarity protection based on MOSFET rectifier circuit: current just flows in, battery can not be shortend from outside.
Internal 15 A fast fuse.

Hawker lead acid attery charge current curve at constant 13,8 Volt: Even at standard battery charging voltage a totaly emptied battery is nearly fully charged back with in one hour. Due to this fact the battery and this powerfull light is the ideal combination to be steadily in use in vehicles for police and other operations.

HID XENON diving lamp:

HID xenon diving lamp based on Nucon GbR ballast XLR3512-1, Nucon GbR control PCB and a 14.4 Volt / NimH 4.5 Ah battery. The diving light is extremely good in weight to burning time ratio: It's weight is just about 2.8 kg but it has a burning time up to 145 minutes in the low reduced mode.
LEDs showing the battery status. The internal control circuit consumes minimum energy only to obtain longest possible operational time. Hall sensors are activated if magnetic push buttons are pressed

22W HID Brightstar with new Nucon AC Ballast in fine rain outside. This retrofit prototype beats so far every other design.